The Michigan Safe Drinking Water Act, 1976 P.A.399, defines backflow as water of questionable quality, wastes, or other contaminant entering a public water supply system due to reversal of flow. Check out the Blackflow Prevention Brochure (PDF) to learn more information.
Backflow protection prevents undesirable water, sewage, bacteria, pathogens, or chemical solutions from entering your drinking (potable) water system.
Contamination of the public drinking water supply is a health hazard. A consumer is being subjected to potentially lethal water borne disease or illness.
Common Water Use Threats
Common water use that could pose a threat to drinking water include:
Chemically treated heating systems
Hose connections to chemical solutions
Hose connections to contaminated water such as in a laundry tub
Lawn irrigation and sprinkling systems
Non-approved ballcock assemblies in toilets
Private non-potable water supplies
Solar heating systems
Water operated sump drain devices
Backflow Prevention Law
The Michigan's Safe Drinking Water Act, P.A. 399, 1976 (As Amended), Michigan Plumbing Code 2009, and local government Cross Connection Control Ordinances that require backflow prevention device installation and regular testing. It is the property owner's responsibility to ensure that backflow prevention devices are properly installed, and tested in compliance with Act 399 of 1976, as Amended.
All testable backflow devices are to be tested upon installation, and tested thereafter at a frequency to be determined by the DPW. Testers certified by the State of Michigan shall test and install backflow prevention devices. Testing varies by device type and typically takes 10 to 30 minutes. The water supply to the backflow preventer is turned off during testing.